17 Reasons Not To Ignore Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and generally fit into frames that were previously in use very easily. If you have double glazed window repairs near me-paned windows that are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case you'll need source some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

If you're planning to try to remove the glass panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards will fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and repair the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the distance between the window and the door is large, you might need to consider security screens that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. As time passes, they may develop a number of problems, including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from getting worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows so you can access the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the fit of your window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. Often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and do an experiment fitting. The corner joints of the sash should be aligned with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you wake up every morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer can be put on. When it is time to uPVC repair, it is important to avoid over-caulking. This can make your window more difficult to clean and lower its energy efficiency.

Make sure that the drainage holes are free of debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens with an ease. They can be replaced by any competent DIYer and are usually done within a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. Changing a window hinge is essentially a very simple process but it can be easier with someone else to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can do this by looking for the arrow on each hinge. This indicates which way the window should be opened.

The issue can be caused either by opening the window improperly or by a poor installation in the factory. This issue can be fixed by sending us a photograph on our website. We will be happy to give you advice.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more smoothly. It can also lower the possibility of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also be disaligned as a result of wear, which can cause a gap where the sash meets frame. If they are damaged beyond repair, it might be necessary to have them realigned. In addition, the interlock could also become misaligned. This is located on the hinge's side, and might require to be cleaned. In some instances, it may be necessary to replace the hinges.

The next most common reason for draughts is window seals, these are prone to wear or damaged over time and let air escape through the gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They can help block out cold air and keep your home warm and cosy!

With a little maintenance and repairs, your upvc windows will continue to provide a great level of security and insulation for your home. It is important to remember that all windows eventually become worn out, and it is more cost-effective to simply replace them than to repair them. If you are having issues with your upvc windows, it is recommended to seek help from a professional immediately.