Repairs To Upvc Windows: What's The Only Thing Nobody Is Talking About

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't corrosion or rot.

It is important to clean and oil UPVC windows and doors regularly. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to make sure that your windows are in good condition.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. If windows with double glazed window repairs panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you're planning attempt to remove the window panes by yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled under.

It's a great idea tape the gap once the glass has been removed. This will keep water and drafts from entering your property until a professional arrives to repair the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap between the window and the door is large, you might want to use security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. In time, they could be affected by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. It's important to take action as soon as you realize that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sagging. First, you'll need to open the windows to reach the frame. After that, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for fitting. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you aren't able to move the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is essential to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. Most often, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close your window and do an initial test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's crucial to take action. The leaks of water from windows do not only lead to the destruction of your home's structure but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window repair (try this) leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Check that any drainage holes do not have debris inside them and that the sill pan has been angled correctly to drain away from the window. In more serious situations, you might have to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is with the seal than the frame. This can be easily repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with ease it could be hinges that are at the fault. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is an easy process, but it's easier to do if you have someone to assist in holding the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused either by opening the window incorrectly or due to a poor installation at the factory. Sending us a picture via our website will often resolve the problem. We are always happy to give advice.

Regular lubrication of the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again because of wear and tear, may become displaced, which can cause gaps to develop where the sash meets the frame. These can be easily fixed by giving them a good cleaning, but when they're beyond repair, it might be necessary to get them aligned or replaced. The interlock may also become misaligned. This happens on the hinge side and could require to be cleaned. In some cases it is possible to replace these.

The next common reason for draughts is window seals. They can become worn down or damaged over time and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to recognize that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. If you encounter any issues with your Upvc window, it's best to consult an expert immediately.