10 Things We Are Hating About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the old frame very easily. However when you have double-pane windows that are secured by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this situation, you will need to locate some plastic spacers that will aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall on the fabric rather than on the floor where they could be trodden under and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you may think about an alarm door that comes with an integrated window repairs near me as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of issues, including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. It is crucial to act immediately if you realize that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to open the windows so you can get at the frame. After that, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the size of the window, tighten the screws to hold them in place.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. It is crucial to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. This is often caused by screws that have become undone over time, but it could be caused by the handle mechanism wearing out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need close the window and then perform a test to ensure that it fits. The corners of the sash must align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how severe the problem is, the old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed window repairs-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze It could be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. Changing a window hinge is essentially a simple procedure, but it is simpler with someone else to help hold the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can do this by checking for the arrows on each hinge. This indicates which way the window should be opened.

The issue could be caused by opening the window incorrectly or by a poor installation in the factory. This issue can be fixed by sending us a picture through our website and we will be happy to give you advice.

It is also crucial to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more smoothly. It also helps prevent corrosion and reduce the possibility of sticking. The ideal time to do this at least once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges, also due to wear and tear may become displaced, which can cause a gap to form where the sash joins the frame. They can be fixed by giving them a good clean, but in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. Second, the interlock can be disaligned. This is located on the hinge side and may need to be cleaned. In some instances it might be necessary to replace the hinges.

The seals may wear out or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be positioned on top of your windowsill. They can help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. However, it is important to recognize that all windows have a life span and they may reach the point when it's more economical to replace them than repair them. If you are experiencing issues with your window made of upvc you should consult a professional as soon as you can.