7 Helpful Tips To Make The Most Of Your Defra Approved Stove List

What is a Defra Approved Wood Burning Stove?

If you reside in a zone of smoke control it is essential to buy a defra stoves exempt stove. A DEFRA exempt (or SE) stove allows you to legally burn wood in a smoke-controlled space.

The stoves are independently tested for the lowest emission possible. Stoves with this status typically carry the word 'Defra approved' in their name or on their specifications.

Approved for Smoke Controlled Areas

Many people believe that living in a Smoke Control Area means you can't use a wood-burning stove but this isn't the case. In reality, a majority of cities and towns are located in a smoke controlled zone but this doesn't mean you can't have a stove, it just implies that you have to make use of an exempt device and only use authorised fuels (usually brquettes) in your stove. The Defra approved stove is a specific type of wood-burning stove that has been inspected to ensure it meets certain criteria in regards to the emissions it releases when burning authorised fuels, and therefore, it can be legally used in the Smoke Control Area.

The Defra logo is widely used in the industry and many of the stoves that are approved bear SE after their name, meaning they are smoke exempt. In order for a stove to be SE approved it must meet strict criteria with regards to emissions and emissions, so you can be certain that if you choose a defra exempt stove you will receive the cleanest and most efficient wood stove available.

If you are looking for a wood-burning stove that is DEFRA regulations stoves-exempt or has SE after its name You will see that the manufacturer may have taken steps to ensure that there are sufficient air intakes on the front of the stove to ensure that there is a full combustion of fuel and that the size of the chimney outlet is adequate to avoid soot accumulation. This is important because it ensures that smoke from the wood stove doesn't escape through the chimney into your home.

Another benefit of the Defra approved stove is that it generally allows you to install it with 5" chimney liner, which will comply with UK building regulations, whilst stoves that aren't Defra-approved will have to be fitted with a bigger 6" liner.

At Stovax we are proud to offer a selection of Defra approved stoves and fires, as well as our Ecodesign Ready stoves that have been created with the future standards of air quality in mind. A large portion of our approved stoves can also be used in conjunction with a smoke-control system for properties that are located in Smoke Control Zones. They can be used to burn a variety smokeless fuels, including fire logs.

Approved for Smokeless fuels

The only stove that can be installed inside a smoke-control zone is one that is a DEFRA approved wood burner, also referred to by the name DEFRA exempt. This stove must be used with solid fuel, which means wood, and preferably well-seasoned. The government tests them to ensure they don't emit excessive smoke and that they can be used only with approved fuels.

The difference between a DEFRA approved stove and a non-approved one typically is very small. With a kit supplied by the manufacturer, many contemporary stoves can be transformed into DEFRA certified in a matter of just a few minutes. This is because a Defra approved stove must undergo rigorous tests and is limited on how much smoke it can generate.

To ensure that the restrictions are kept, the stove must be able limit its combustion air so that it doesn't rob itself of oxygen and cause it to smolder. This is done through a mechanism within the stove that allows the air into the firebox during combustion which is typically hidden within the stove and underneath the base of the fire box.

Stove World UK has a large selection of DEFRA approved stoves from some of the best manufacturers in the country, including Stovax Arada and Burley. They are available in a wide range of styles and finishes. You can also pick from an impressive selection of Ecodesign ready stoves that are specifically designed to meet future air quality requirements.

Smoke Control Areas are typically located around large towns and city centres and you can visit your local authority's website to determine if the area you live in is classified as one. If you live in a smoke-free zone, it is very important that you purchase an DEFRA approved stove for your property, to avoid being fined by your local authority. This is because if you burn 'unauthorised fuel in an unapproved stove, like coal or any other solid fuels that could result in fines of up to PS300.

Approved for wood

A DEFRA approved stove, also called a smoke exempt wood stove is a device that can be used to burn wood in smoke Control Area. The stove will bear the Defra approved logo or bear 'SE' after its name which means that it can be used in smoke-controlled areas that burn approved fuels, in this case wood.

Many older wood stoves emit large quantities of particulate matter, which can cause or worsen respiratory problems, asthma attacks and heart issues. It is therefore important to purchase a stove that meets strict emission standards set forth by the Environmental Protection Agency. You should look for the "EPA 2020 Certified" label, which signifies that the stove is in compliance with the emissions limits that are currently in place.

If you purchase a cooktop which is not EPA-certified and you live in a smoking area you'll have to renew the certification before you can use the stove. It can be costly and time-consuming, but it is legally required. Homeowners who sell a house with a wood stove that is not certified could be liable for tax credits or fines that relate to pollution-free air.

Most modern stoves can be modified to become Defra approved with an adjustment kit or kit that the installer offers. The major difference between DEFRA approved stoves and Defra Burning Mdf those that aren't is the combustion air control system, which controls the amount of air that passes through the stove when it's in normal operation. Modifications are usually applied to the base or the underside of a stove's firebox.

Certain manufacturers make two versions of a wood stove: one that is Defra-approved while the other not. The reason is that the cost of putting a wood stove through the rigorous Defra testing is costly. To reduce these costs, they will sell the non-approved version at a cheaper cost. The DEFRA approved version will have had the combustion air modification performed as part of the testing process.

Approved Gas

Before the Clean Air Acts were brought in residential homes could burn any type of fuel they wanted which resulted in large amounts of smoke emissions as well as health issues. To combat this Defra established Smoke Control Areas which meant that residential homes couldn't produce any smoke from their wood burners or multifuel stoves unless the appliance was Defra approved to burn only approved fuels like manufactured smokeless coals and anthracite.

Defra approved SE (Smoke-Exempt) Stoves have been put through rigorous testing in order to demonstrate that they can burn authorised fuels cleanly within a Smoke Control Zone. They achieve this by utilising the most advanced combustion technology that constantly delivers a minimum level of secondary air to the firebox so that even if the stove is used with approved fuels like anthracite or manufactured smokeless coals it can still comply with Defra's rules for Smoke Control Areas.

The Stove Yard has a vast selection of stoves that are Defra approved that are perfect for those who live in a smoke control area and need a new wood burning fireplace. We offer a wide range of traditional, contemporary and inset Defra approved stoves from industry-leading manufacturers like Stovax, Arada, Burley and AGA.

The good news is that there is no visual difference between a stove approved by Defra and one that isn't. However the stoves that are approved by Defra have a few features designed to ensure they burn more efficiently. In general, they have a different design of grate and air vents, and on the gas versions, they may also have an alternative size flue outlet.

Another benefit of a defra Burning mdf Approved stove is that they'll typically have five" (125mm) flue outlet which means that you can use a smaller stainless steel twin wall flexible chimney liner, which is cheaper than a standard 6" (150mm) liner. This is beneficial when putting an approved wood burning stove from Defra in an older or non-standard chimney stack. It saves money on the cost of relining a chimney with a larger diameter liner.