Repairs To Upvc Windows Isn't As Tough As You Think

Repairs to upvc window repair Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is important to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. However when windows with double panes are anchored by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance, you will need to locate some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

It's a great idea seal the gap after the glass has been removed. This will keep drafts and water from entering your home until a professional arrives to fix the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. However, with time, they may be afflicted by a variety of issues, including sagging. A sagging window can cause problems with light, draughts, and even security. It's crucial to act as soon as you notice your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can reach the frame. After that, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you cannot reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles could also loosen. This is often caused by screws that have been removed over time, but it could also be caused by the handle mechanism getting worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need to close the window and do an initial fitting. The corners of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is a fairly simple fix that can be completed by any skilled DIYer. Based on the severity of the issue the old caulking may need to be removed before a new layer can be applied. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed windows, it is more likely to be a problem with the glass seal, UPVC window repairs rather than the frame or sagging. It is also possible to be repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens with a breeze. They can be replaced by any competent DIYer and are usually completed in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. The process of replacing a hinge on a window is essentially a very simple process but it can be easier to do with someone else to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular manner or because of inadequate installation at the factory. Sending us a picture via our website will often solve the issue. We are happy to offer suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also reduce the risk of a window sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become misaligned due to wear, creating gaps where the sash meets frame. If they are beyond repair, it could be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window and uPVC window repairs can also become misaligned, again it is possible to give them a thorough clean, however in some cases it might be necessary to have them replaced.

The next most common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also lessen draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it could be more cost-effective to replace them than to repair them. If you encounter any issues with your window made of upvc it is recommended to speak with an expert as soon as you can.