10 Things We Do Not Like About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. However, if you have double pane windows that are anchored by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this instance you'll need to source some plastic spacers that will assist the new pane to fit correctly into the window frame.

If you plan to attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

It's a great idea to tape the gap once the glass is removed. This will prevent drafts and water from getting into your property until a professional is able to fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap between the window and the door repair is substantial, you may prefer an alarm system that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they can suffer from a variety of issues like sliding. A sagging window in uPVC could cause issues with light, draughts, and even security. It's important to take action when you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows so you can reach the frame. Then, using a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you are unable to move the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. Often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to repair the loose uPVC window Repair handle yourself. You'll first need to close the window and do an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is important to act if you wake up every morning to discover mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on the severity of the problem is, the old caulking may need to be removed. When it comes to uPVC repair, you must be careful not to over-caulk. This can make your window more difficult to clean and decrease its energy efficiency.

Make sure that the drainage holes are free of debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed glass it is more likely that the problem is related to the seal, not the frame. This can be easily repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open in a breeze It could be hinges that are at fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is an easy process but it can be easier with someone else to help you hold the frame up.

Check that the uPVC hinges open and close in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or by poor installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are more than happy to offer assistance.

It is also crucial to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also stop corrosion and decrease the chance of sticking. The ideal time to do this once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges, also because of wear and tear, can become misaligned, this can cause a gap to form where the sash joins the frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, window repair it might be necessary to have them aligned or replaced. Secondly the interlock, this is located on the hinge of the window, may also become misaligned, again it's feasible to give them a clean but in some instances it could be necessary to get them replaced.

The next common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc windows will provide an excellent level of insulation and security for your home. It is crucial to recognise that windows last for a certain period of time and eventually, they will reach an point at which it is more efficient to replace them than fix them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance as soon as possible.