Searching For Inspiration? Check Out Replacement Window Handle

Choosing uPVC Replacement Window Handles

Nearly all customers agree that these upvc replacement window handles are simple to install and feel like high-quality. But it's important to understand that the kind of handle you pick should be appropriate for your window.

The key factor is the step height which refers to the gap beneath the nose of the handle to the base or frame. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There is a variety of replacement window handles made of upvc available for purchase. They come in many different colours and styles so there's bound to be something that will fit your existing windows. It's easy to impulse buy especially if the handle fails, so it's a good idea to look over certain things prior to committing to buying a replacement. The first thing to consider is the kind of upvc handle do you currently have and what the difference between the kinds is. The table below lists the most common handles to help you find the one that fits your upvc windows.

Espag handles are the most popular and are commonly found on modern double-glazed windows. They are usually fitted to the frame with two screws that are screwed into the frame from both sides.

The spindle bar on the back could be of different in size, and will determine if they're left-handed or right-handed. It's important to take the measurements of the handle you currently have to ensure that you purchase the right replacement.

The arm is attached to the frame with two bolts, similar to the Espag handle. The arm is curved at a low angle so that it doesn't damage your blinds. This is a great option for blinds on your windows made of upvc and want to ensure that the handle will blend in with the blinds.

Cockspur handles are similar to Espag handles, however they have a nose that closes over a wedge which sits on the window frame. This kind of handle can be often found on older upvc windows as well as some wooden windows.

Tilt and turn handles are usually found on casement windows and can be operated either by turning the handle or pushing on the top of the window. This opens the window from the inside, allowing you to clean from outside without needing to step out on a ladder or step over the fence. They are also an excellent option for people with restricted mobility. They are an excellent way to increase security and accessibility at home.

Hints and tips

Many people will have to replace their uPVC window handles at some moment. It's important to have some tips and tricks that can make the job easier.

Examine the type of handle that is at your home. Depending on the type of handle is attached to and which locking mechanism it uses, it may be necessary to replace the entire handle and lock. For instance, if shoot bolts (espag) and roller cams are seizing or jammed, you will need to change them as well as the handle itself.

Fortunately, the majority of uPVC handles are similar and adhere to industry standard sizes, making replacing them a simple task. First, remove the screw covers on the handles. These are usually pozidrive screws. After the screws have been removed then you'll be able to dismantle the handle.

When you have the handle split it is a good idea to make a note of how much of the spindle is protruding from the base of the handle. This will help you determine the length of the spindle for a replacement handle. Simply measure the amount that the square peg extends out of the bottom of handle.

This is particularly important for inline uPVC windows handles, as they are always straight and only open to the left or right. They aren't able to function in the middle. If you're not sure what kind of handle you have in your home, it might be an excellent idea to borrow the handle from your neighbor's home and observe how it functions to get an idea.

You can also determine the handiness of a uPVC window by observing the way the handle turns when it is in use. Handles can be turned either clockwise or counter-clockwise. If you are unsure then ask someone to open the window using the handle and see what happens.

Measure the spindle

It isn't easy to select the right replacement handle for your window since different handles do not have the same size. It is essential to accurately measure the spindle when installing the new handle. This will ensure that the handle fits. There are many different kinds of uPVC window handles and they operate in different ways therefore it is crucial that you know what type of handle you are using and the type of locking system.

The spindle of the Espag handle is a part that extends from the rear of the handle and then into the lock gearbox within the window frame. When you turn the handle this turns the lock within the gearbox, and opens the window. They are installed on uPVC windows with casement. They can be locked with keys for extra security.

Cockspur handles are typically found in older double-glazed uPVC window frames. They have a "nose", which is secured by a wedge-shaped striker block. They are also quite simple to use and can be locked using keys. These handles are somewhat more difficult to find replacements for because they aren't as well-known as the espagnolette handle.

If you have a tilt-and-turn uPVC then you'll need a replacement handle with a different locking mechanism. The handle can tilt the window, and allow it to rotate back and forth to fully open it. You should select a handle with a spindle that is at least 55mm to be able to reach the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you'll have to be careful when unscrewing it. It may be necessary to open the window more than normal to reach both screws that hold it to the frame. Once you have fitted your new uPVC handle and verified that it is in the right position, then you can tighten the screws and test the lock to make sure it is working correctly.

Fit the new handle

When you have the proper handle replacement, it will simply screw into place. It will require a screwdriver and an electric one could be a lot easier. When screwing the screws in, it is important not to over tighten the screws, as this can cause the handle to warp or crack.

The other important step when installing the new handle is to put in the spindle. The spindle is the component which runs through the handle to operate the locking mechanism of the window. It is crucial that it is fitted correctly, as it will ensure that the window is able to be closed and opened with confidence.

There are several different types of uPVC window glass replacement near me handles. They include:

Espagnolette Handles - these are inline handles that can be used on tilt and turn windows to open the window.

Cranked Espagnolette Handles: These are like inline handles but have a curved shape which is ideal for hard-to reach windows.

Tilt and turn handles These are used to operate the opening and closing mechanisms for tilt and turn. They also move windows.

These are the most commonly used and the majority of uPVC windows have these in their place. They are commonly called 'Bay windows' in the UK.

It can be very frustrating when your uPVC handle breaks. There is no need to replace the entire uPVC window because of a damaged window handle. There are a number of simple steps that can be taken to fix and replace a broken uPVC window handle.

You can repair your broken window handle fast by identifying the type and measuring the spindle. It is essential to take your time and prioritise security when working with windows and tools however, this is a simple task. It can mean the difference between having a secure and secure home, or a window that is easily opened. If you have any concerns or would like to speak with a professional regarding replacing your window handle, call Bridgewater glass for window replacement. We have a team of highly experienced and knowledgeable professionals who can help with any issues you may be facing.