Autowatch Ghost Installers: What's The Only Thing Nobody Is Talking About
작성자 정보
- Alvin 작성
- 작성일
본문
Autowatch Ghost Installers Nottingham
Everyday, more cars are taken with the keys of the owner. Cloning equipment and door lock picks are readily accessible on the internet, that allow thieves to clone your remote key and start your vehicle in as little as 20-30 seconds.
Autowatch Ghost Immobiliser stops these techniques by blocking the ignition of your vehicle in the event that a unique PIN code is entered. It is silent and discreet and doesn't use LED indicators which makes it inaccessible to criminal.
Discreet & Silent
Key cloning online is a popular tool employed by thieves to steal vehicles with the owner's key. Our Autowatch Ghost immobiliser prevents this theft by preventing your vehicle from starting until you enter your unique, personalised codes that are entered using the buttons that are already on the dashboard or steering wheel.
When the Ghost is activated by entering your personalised pin code it will disable all the vehicles electronics & stop the engine from starting. It is designed to be discreet and quiet, meaning that it does not trigger any alarm sensors within the vehicle and that no LED indicators are displayed. This makes it virtually impossible to spot using scanners that are used to detect vehicle theft. Our installation engineers are TASSA registered, DBS security checked, and system trained technicians and will install the Ghost for you in a covert manner, leaving no evidence that it has ever been fitted.
Our Ghost 2 device can also be used as a tracker. It transmits GPS signals to your mobile which allows you to monitor the vehicle's movements as well as locate it on the map. You can track your car even when it is being repaired or serviced in the garage.
The application can be turned off and on within the application. This gives you complete control over your car's security. The Autowatch Ghost app can be used to set up the "Service Mode" feature of your vehicle, which allows you to leave the vehicle without entering the disarming button sequence or even be inside the vehicle. This can be particularly useful for those who need to drop the car off at a garage nearby to get a service or repair.
Our latest application also enables you to use your mobile phone and your Ghost-II will be automatically disarmed once it gets within the range of the vehicle making security simple and easy. You can even enable this feature with your phone in sleep mode, which you can carry in your pocket!
Easy to operate
The Autowatch Ghost immobiliser is silent and blocks thieves from cloning or hacking your key fob. The device is directly connected to the vehicle's CAN Data Network. It only allows the vehicle to start after a PIN number has been entered using the original buttons on your vehicle. The user can enter the code in a secure location or through the smartphone app. Autowatch Ghost is installed under the steering wheel or on the dash by TTW, so only you'll know it's there. It is also weatherproof, and is so tiny that it's unnoticeable by car thieves looking for circuit breaks or the telltale clicking sound of an ignition relay.
With the availability of affordable cloning equipment & door lock pick sets, thieves have the ability to take on virtually any modern vehicle, without the keys of the owner. The Autowatch Ghost immobiliser blocks this from happening and can be transferred to another vehicle if it is compatible.
This device is installed by a qualified technician at a secret location and then concealed so that it is inaccessible to thieves even when the engine is running. The Ghost also doesn't send out any radio frequency signals, so it's impossible for a thief to locate the device by using RF scanning and code-grabbing technology.
The Ghost can be set to Service/Valet Mode so that you don't have to be concerned about the technician knowing your pin code if your vehicle is taken to the garage for service. The Ghost can do this because it uses the original buttons of the vehicle, therefore no additional wiring is required.
The Autowatch Ghost is also a TASSA Verified Product which means that a number of insurance companies recognise it as an additional security measure. It is advisable to talk to your insurance provider prior to installing the ford focus ghost installer immobiliser. You can save money on your insurance and shield your vehicle from expensive theft claims.
No Radio Frequency Signals
Autowatch Ghost is the only system to protect your vehicle from theft due to modern day key cloning. If your car is located in a bodyshop, garage or dealership and someone on the inside copies the original key fob and the Ghost immobiliser still cuts out the engine as only you are able to enter the pin code that you have chosen to start the vehicle. Our TASSA approved installers will show you how to Become a autowatch Ghost installer to change this pin code according to the requirements, in case the device is compromised.
The Ghost does not transmit radio frequency signals like other systems like trackers. This means that thieves are unable to detect it using code grabbers or RF scanners. This feature in conjunction with the discreet and silent operation makes it a discreet yet effective solution.
A simple smart-phone application is available for the iPhone to connect with the Ghost-II. If you are ready to use your vehicle, just enable the application and it will disable the Ghost-II when you get close to it. You can then get into the vehicle and drive away, it is safe to do so because your phone will automatically re-arm when you are away from the Ghost-II.
This is an easy and efficient method to ensure that you are safe when driving your car. This app is available for download at no cost from the iPhone App Store.
The Ghost-II is different from the original Autowatch Ghost as it does not have LED indicators. This means that thieves cannot detect it until they are close enough to the vehicle to open a door and then turn on the light.
The Autowatch Ghost-II has a power cut-disconnect function which shuts off the engine of your car and turn off the ignition will be powered off once the system is activated. This is a great security feature to protect your vehicle when you are traveling for a long time or have put the keys in the ignition. This is a great safety feature for families and business users who must park in public areas or for those who work in the road.
No LED Indicators
The Ghost is connected to the vehicles CAN Data system, and a personalized PIN code is entered via chosen options on the dash board or on the steering wheel which allows the device to activate. It is completely silent and does not use any LED indicators. It can be transferred to another vehicle, if that the new vehicle is compatible and the technology has not changed since the time it was first installed. Holbon UK Ltd install and give the Ghost immobiliser along with owner's guide and a certificate of authenticity.
Everyday, more cars are taken with the keys of the owner. Cloning equipment and door lock picks are readily accessible on the internet, that allow thieves to clone your remote key and start your vehicle in as little as 20-30 seconds.
Autowatch Ghost Immobiliser stops these techniques by blocking the ignition of your vehicle in the event that a unique PIN code is entered. It is silent and discreet and doesn't use LED indicators which makes it inaccessible to criminal.Discreet & Silent
Key cloning online is a popular tool employed by thieves to steal vehicles with the owner's key. Our Autowatch Ghost immobiliser prevents this theft by preventing your vehicle from starting until you enter your unique, personalised codes that are entered using the buttons that are already on the dashboard or steering wheel.
When the Ghost is activated by entering your personalised pin code it will disable all the vehicles electronics & stop the engine from starting. It is designed to be discreet and quiet, meaning that it does not trigger any alarm sensors within the vehicle and that no LED indicators are displayed. This makes it virtually impossible to spot using scanners that are used to detect vehicle theft. Our installation engineers are TASSA registered, DBS security checked, and system trained technicians and will install the Ghost for you in a covert manner, leaving no evidence that it has ever been fitted.
Our Ghost 2 device can also be used as a tracker. It transmits GPS signals to your mobile which allows you to monitor the vehicle's movements as well as locate it on the map. You can track your car even when it is being repaired or serviced in the garage.
The application can be turned off and on within the application. This gives you complete control over your car's security. The Autowatch Ghost app can be used to set up the "Service Mode" feature of your vehicle, which allows you to leave the vehicle without entering the disarming button sequence or even be inside the vehicle. This can be particularly useful for those who need to drop the car off at a garage nearby to get a service or repair.
Our latest application also enables you to use your mobile phone and your Ghost-II will be automatically disarmed once it gets within the range of the vehicle making security simple and easy. You can even enable this feature with your phone in sleep mode, which you can carry in your pocket!
Easy to operate
The Autowatch Ghost immobiliser is silent and blocks thieves from cloning or hacking your key fob. The device is directly connected to the vehicle's CAN Data Network. It only allows the vehicle to start after a PIN number has been entered using the original buttons on your vehicle. The user can enter the code in a secure location or through the smartphone app. Autowatch Ghost is installed under the steering wheel or on the dash by TTW, so only you'll know it's there. It is also weatherproof, and is so tiny that it's unnoticeable by car thieves looking for circuit breaks or the telltale clicking sound of an ignition relay.
With the availability of affordable cloning equipment & door lock pick sets, thieves have the ability to take on virtually any modern vehicle, without the keys of the owner. The Autowatch Ghost immobiliser blocks this from happening and can be transferred to another vehicle if it is compatible.
This device is installed by a qualified technician at a secret location and then concealed so that it is inaccessible to thieves even when the engine is running. The Ghost also doesn't send out any radio frequency signals, so it's impossible for a thief to locate the device by using RF scanning and code-grabbing technology.
The Ghost can be set to Service/Valet Mode so that you don't have to be concerned about the technician knowing your pin code if your vehicle is taken to the garage for service. The Ghost can do this because it uses the original buttons of the vehicle, therefore no additional wiring is required.
The Autowatch Ghost is also a TASSA Verified Product which means that a number of insurance companies recognise it as an additional security measure. It is advisable to talk to your insurance provider prior to installing the ford focus ghost installer immobiliser. You can save money on your insurance and shield your vehicle from expensive theft claims.
No Radio Frequency Signals
Autowatch Ghost is the only system to protect your vehicle from theft due to modern day key cloning. If your car is located in a bodyshop, garage or dealership and someone on the inside copies the original key fob and the Ghost immobiliser still cuts out the engine as only you are able to enter the pin code that you have chosen to start the vehicle. Our TASSA approved installers will show you how to Become a autowatch Ghost installer to change this pin code according to the requirements, in case the device is compromised.
The Ghost does not transmit radio frequency signals like other systems like trackers. This means that thieves are unable to detect it using code grabbers or RF scanners. This feature in conjunction with the discreet and silent operation makes it a discreet yet effective solution.
A simple smart-phone application is available for the iPhone to connect with the Ghost-II. If you are ready to use your vehicle, just enable the application and it will disable the Ghost-II when you get close to it. You can then get into the vehicle and drive away, it is safe to do so because your phone will automatically re-arm when you are away from the Ghost-II.
This is an easy and efficient method to ensure that you are safe when driving your car. This app is available for download at no cost from the iPhone App Store.
The Ghost-II is different from the original Autowatch Ghost as it does not have LED indicators. This means that thieves cannot detect it until they are close enough to the vehicle to open a door and then turn on the light.
The Autowatch Ghost-II has a power cut-disconnect function which shuts off the engine of your car and turn off the ignition will be powered off once the system is activated. This is a great security feature to protect your vehicle when you are traveling for a long time or have put the keys in the ignition. This is a great safety feature for families and business users who must park in public areas or for those who work in the road.
No LED Indicators
The Ghost is connected to the vehicles CAN Data system, and a personalized PIN code is entered via chosen options on the dash board or on the steering wheel which allows the device to activate. It is completely silent and does not use any LED indicators. It can be transferred to another vehicle, if that the new vehicle is compatible and the technology has not changed since the time it was first installed. Holbon UK Ltd install and give the Ghost immobiliser along with owner's guide and a certificate of authenticity.
관련자료
-
이전
-
다음
댓글 0
등록된 댓글이 없습니다.