The Best Advice You Can Ever Receive About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

It is important to clean and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. However, if windows with double panes are held in place by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this instance, you will need to find some plastic spacers that assist the new pane to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor, where they could be trampled under.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the distance between the door and the window is substantial, you may prefer an alarm system that has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sagging. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window which is sagging. You'll first need to open the windows so you can get at the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window repair to check the fit after you have repositioned your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in place.

If you are unable to reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and secure from draughts.

UPVC handles can also become loose. Often it is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need close your window repair and do an experiment fit. The corners of the sash need to align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or missing.

This is a fairly simple fix that can be completed by any competent DIYer. Depending on the severity of the problem the caulking used previously might need to be removed before a fresh layer can be applied. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

Verify that the drainage holes are free of debris in them and that the sill pan has been properly angled to drain away from the window. In more extreme situations, you may have to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your upvc window repair windows are stiff to open, or slack and blow open in a breeze it could be hinges at the fault. They can be easily replaced by any competent DIYer and can usually be completed in just a few minutes.

Almost every household in the UK will have either top hung or side hung upvc window repair windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. It is very easy to change a window hinge, but it's simpler if you have someone to help you hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should open.

The issue can be caused by opening the window improperly or a faulty installation at the factory. This issue can be fixed by sending us a photo via our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. The hinges can also become unbalanced due to wear, causing an opening where the sash and frame meet. They can be repaired by giving them thorough clean, however if they are beyond repair it could be necessary to get them re-aligned or replaced. The interlock, which is on the hinge side of the window, can also become misaligned, again it's possible to just give them a clean but in some cases it might be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures, and reduce draughts.

One of the most effective methods to reduce drafts is to use a draught excluder. These are typically made of fabric that are filled with some sort of filler and can be placed on the windowsill on top. These will help to keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair windows made of upvc will provide a great level of insulation and security for your home. It is crucial to realize that all windows have a life span and they may reach an point at which it is more efficient to replace them than repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with a professional as soon as possible.