The 10 Scariest Things About Autowatch Ghost Installers
작성자 정보
- Berry 작성
- 작성일
본문
Autowatch Ghost Installers Nottingham
Everyday more cars are stolen without owners keys. Cloning tools and door lock picks are readily accessible on the internet and allow thieves to clone their key remotes and start your vehicle in as little as 30 seconds.
Our Autowatch Ghost immobiliser blocks this by preventing your car's ignition until a unique, personalised PIN is entered. It is discreet & silent and doesn't rely on LED indicators, making it undetectable to a criminal.
Distinction & Silence
Everyday more vehicles are stolen without the owner's keys with key cloning equipment easily accessible to thieves online. Our Autowatch Ghost immobiliser can prevent this kind of theft by preventing the vehicle from starting unless you input your unique personalised code, which you enter via existing buttons on your car dashboard or steering wheel.
When you enter your personal pin code, the Ghost will disable all electronics within the vehicle and Autowatch ghost installer stop the engine from getting started. It is designed to be discreet and quiet, meaning that it does not activate any alarm sensors inside the vehicle, and no LED indicators are displayed. This makes it nearly impossible to spot using scanners that are used to detect vehicle theft. Our installation technicians are TASSA registered, DBS security checked, and system-trained technicians. They will install the Ghost for you in a secret manner, leaving no trace that it was ever installed.
Our Ghost 2 device can also be used as a tracker. It sends GPS signals to your mobile, allowing you to view the car's movements and pinpoint it on the map. This allows you to keep an eye on the location of your car whilst it is in garage for repairs or maintenance.
You can turn the app on/off within the app. This gives you total control over your car's security. The Autowatch Ghost application can be used to also enable the 'Service Mode' feature for your car that will allow you to drive away without entering the button disarm sequence or even be in the vehicle. This is especially useful for those who have to drop their vehicle off at the local garage to receive repair or service.
Our latest application also enables you to just use your mobile phone and your Ghost-II will be disarmed automatically when it comes into the range of the vehicle This makes security easy and convenient. You can even activate this feature while your phone is in sleep mode in your pocket!
Easy to operate
The Autowatch Ghost immobiliser works silently to stop vehicle thieves from cloning your key fob or hacking into the system. The device is connected to the vehicle's CAN Data Network and only allows your vehicle to start when a personalised PIN code is entered using the original buttons inside your vehicle. This can be done by the user in a hidden location or through the phone app. Autowatch Ghost is installed under the steering wheel or dash by TTW and only you'll be aware that it's there. It is also weatherproof, and so small that it is undetectable by car thieves looking for circuit breakers or the telltale clicking sound of an ignition relay.
With the availability of low-cost cloning equipment & door lock pick sets, thieves are now able to attack almost any modern vehicle without the keys of the owner. The Autowatch Ghost immobiliser stops this from happening. It can also be transferred to a new vehicle in the event of changing vehicles throughout the duration of your warranty, as long as the vehicle is compatible with Autowatch Ghost.
The device is installed by a qualified technician at an unidentified location and then concealed to make it inaccessible to thieves even when the engine is running. The ghost tracker installation does not emit radio frequency signals, so it's impossible for thieves using RF scanning or code-grabbing technology to find the device.
Another benefit of the Ghost is that it can be put into Service/Valet mode. This means that when your vehicle is scheduled for maintenance at a garage, you don't have to worry about giving the technician access to your pin code. The Ghost can do this because it uses the original buttons of the vehicle, therefore no extra wiring is required.
The autowatch ghost installer Ghost is also a TASSA Verified Product which means that a lot of insurance companies have accepted it as an additional security measure. It's a good idea to speak with your insurance provider prior to having the Ghost immobiliser installed. This will allow you to obtain a good price on your policy and be sure your vehicle is secure against a costly theft claim.
No Radio Frequency Signals
Autowatch Ghost is a system that prevents vehicle theft by preventing modern-day key copying. If your car is in a bodyshop, garage or dealership & somebody inside clones your original key fob then the Ghost immobiliser will still cut off the engine of your vehicle since only you are able to enter the personal PIN code to begin it. If the device is compromised, our TASSA-approved installers will explain how to alter the pin code.
The Ghost doesn't transmit radio frequency signals, similar to other systems such as trackers. This means that thieves can't detect it with codes grabbers or RF scanners. This feature along with the quiet and autowatch ghost installer discreet operation makes this a quiet yet effective solution.
A simple smart-phone application is available for the iPhone to connect with the Ghost-II. Just enable the app when you want to use your car, and when you get close to the Ghost-II it will disable it. It is safe to drive in the car, as your phone will automatically arm once you leave.
This is a very neat and convenient method of making extreme security a breeze whenever you need to drive your vehicle. This app is free of charge for download from the iPhone App Store.
Unlike the original Autowatch Ghost system the Ghost-II does not have LED indicators and therefore is completely undetectable to thieves since they cannot see it unless they are close enough to the vehicle's window and switch on the light.
The Autowatch Ghost-II also features a power cut disconnect feature that shuts the engine of your vehicle and power to the ignition when the system is activated. This is a great security feature to guard against theft of your vehicle when traveling for a long time or have put the keys in the ignition. This is a great safety feature for families and business users who must park in public areas or for those who work in the road.
No LED Indicators
The Ghost is connected to the vehicles CAN Data system. A personalised PIN code is entered using selected options on the dash board or steering wheel and allows the device to be activated. It doesn't use LED indicators, making it unnoticeable by scanners for vehicle theft, and also silent to operate. It is transferable to another vehicle, as long as the new vehicle is compatible and the technology has not changed since then. Holbon UK Ltd install and give the Ghost immobiliser along with owner's guide and a certificate of authenticity.
Everyday more cars are stolen without owners keys. Cloning tools and door lock picks are readily accessible on the internet and allow thieves to clone their key remotes and start your vehicle in as little as 30 seconds.
Our Autowatch Ghost immobiliser blocks this by preventing your car's ignition until a unique, personalised PIN is entered. It is discreet & silent and doesn't rely on LED indicators, making it undetectable to a criminal.
Distinction & Silence
Everyday more vehicles are stolen without the owner's keys with key cloning equipment easily accessible to thieves online. Our Autowatch Ghost immobiliser can prevent this kind of theft by preventing the vehicle from starting unless you input your unique personalised code, which you enter via existing buttons on your car dashboard or steering wheel.
When you enter your personal pin code, the Ghost will disable all electronics within the vehicle and Autowatch ghost installer stop the engine from getting started. It is designed to be discreet and quiet, meaning that it does not activate any alarm sensors inside the vehicle, and no LED indicators are displayed. This makes it nearly impossible to spot using scanners that are used to detect vehicle theft. Our installation technicians are TASSA registered, DBS security checked, and system-trained technicians. They will install the Ghost for you in a secret manner, leaving no trace that it was ever installed.
Our Ghost 2 device can also be used as a tracker. It sends GPS signals to your mobile, allowing you to view the car's movements and pinpoint it on the map. This allows you to keep an eye on the location of your car whilst it is in garage for repairs or maintenance.
You can turn the app on/off within the app. This gives you total control over your car's security. The Autowatch Ghost application can be used to also enable the 'Service Mode' feature for your car that will allow you to drive away without entering the button disarm sequence or even be in the vehicle. This is especially useful for those who have to drop their vehicle off at the local garage to receive repair or service.
Our latest application also enables you to just use your mobile phone and your Ghost-II will be disarmed automatically when it comes into the range of the vehicle This makes security easy and convenient. You can even activate this feature while your phone is in sleep mode in your pocket!
Easy to operate
The Autowatch Ghost immobiliser works silently to stop vehicle thieves from cloning your key fob or hacking into the system. The device is connected to the vehicle's CAN Data Network and only allows your vehicle to start when a personalised PIN code is entered using the original buttons inside your vehicle. This can be done by the user in a hidden location or through the phone app. Autowatch Ghost is installed under the steering wheel or dash by TTW and only you'll be aware that it's there. It is also weatherproof, and so small that it is undetectable by car thieves looking for circuit breakers or the telltale clicking sound of an ignition relay.
With the availability of low-cost cloning equipment & door lock pick sets, thieves are now able to attack almost any modern vehicle without the keys of the owner. The Autowatch Ghost immobiliser stops this from happening. It can also be transferred to a new vehicle in the event of changing vehicles throughout the duration of your warranty, as long as the vehicle is compatible with Autowatch Ghost.
The device is installed by a qualified technician at an unidentified location and then concealed to make it inaccessible to thieves even when the engine is running. The ghost tracker installation does not emit radio frequency signals, so it's impossible for thieves using RF scanning or code-grabbing technology to find the device.
Another benefit of the Ghost is that it can be put into Service/Valet mode. This means that when your vehicle is scheduled for maintenance at a garage, you don't have to worry about giving the technician access to your pin code. The Ghost can do this because it uses the original buttons of the vehicle, therefore no extra wiring is required.
The autowatch ghost installer Ghost is also a TASSA Verified Product which means that a lot of insurance companies have accepted it as an additional security measure. It's a good idea to speak with your insurance provider prior to having the Ghost immobiliser installed. This will allow you to obtain a good price on your policy and be sure your vehicle is secure against a costly theft claim.
No Radio Frequency Signals
Autowatch Ghost is a system that prevents vehicle theft by preventing modern-day key copying. If your car is in a bodyshop, garage or dealership & somebody inside clones your original key fob then the Ghost immobiliser will still cut off the engine of your vehicle since only you are able to enter the personal PIN code to begin it. If the device is compromised, our TASSA-approved installers will explain how to alter the pin code.
The Ghost doesn't transmit radio frequency signals, similar to other systems such as trackers. This means that thieves can't detect it with codes grabbers or RF scanners. This feature along with the quiet and autowatch ghost installer discreet operation makes this a quiet yet effective solution.
A simple smart-phone application is available for the iPhone to connect with the Ghost-II. Just enable the app when you want to use your car, and when you get close to the Ghost-II it will disable it. It is safe to drive in the car, as your phone will automatically arm once you leave.
This is a very neat and convenient method of making extreme security a breeze whenever you need to drive your vehicle. This app is free of charge for download from the iPhone App Store.
Unlike the original Autowatch Ghost system the Ghost-II does not have LED indicators and therefore is completely undetectable to thieves since they cannot see it unless they are close enough to the vehicle's window and switch on the light.
The Autowatch Ghost-II also features a power cut disconnect feature that shuts the engine of your vehicle and power to the ignition when the system is activated. This is a great security feature to guard against theft of your vehicle when traveling for a long time or have put the keys in the ignition. This is a great safety feature for families and business users who must park in public areas or for those who work in the road.
No LED Indicators
The Ghost is connected to the vehicles CAN Data system. A personalised PIN code is entered using selected options on the dash board or steering wheel and allows the device to be activated. It doesn't use LED indicators, making it unnoticeable by scanners for vehicle theft, and also silent to operate. It is transferable to another vehicle, as long as the new vehicle is compatible and the technology has not changed since then. Holbon UK Ltd install and give the Ghost immobiliser along with owner's guide and a certificate of authenticity.
관련자료
-
이전
-
다음
댓글 0
등록된 댓글이 없습니다.