10 Myths Your Boss Is Spreading About Repairs To Upvc Windows Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. They do not rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. However, if you have Double Glazed Window Repairs Near Me-pane windows that are anchored by internal beading it will be more difficult to remove the old panes and put in new ones. In this case it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you're planning attempt to remove the window panes by yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the fabric instead of landing on the floor where they could be trodden under and cause further damage.

It's a great idea tape the gap once the glass is removed. This will keep drafts and water from getting into your property until a professional comes out to fix the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the distance between the window and the door is significant, you may prefer security screens that includes a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they can suffer from a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll need open the window so that you can access the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window repair to check the fit after you've relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure that they remain in position.

If you are unable to move the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it could be caused by the handle mechanism wears out. It's relatively easy to fix a loose upvc window repairs near me handle. First, you'll need to close the window and then perform an initial fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you get up each morning to discover mouldy walls and floors that are wet. Windows that leak water do not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on the severity of the issue is, old caulking may need to be removed. When it comes to uPVC repair, you must be careful not to over-caulk. This can make your window harder to clean and lower its energy efficiency.

Make sure that the drainage holes have no debris inside them and that the sill pan is properly angled to drain away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely the problem is with the seal rather than the frame. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with ease it could be the hinges that are at fault. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Like any mechanical component hinges will be damaged over time. It is very easy to change a window hinge however it is easier if someone else helps hold the frame.

Verify that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrows on each hinge, this shows which way the window should open.

The problem can be caused by opening the window improperly or due to a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are always happy to give advice.

It is also essential to grease the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also become misaligned due to wear, causing a gap where the sash and frame meet. If they are beyond repair, it might be required to realign them. The second is the interlock, which is on the hinge side of the window, can be misaligned. Again, it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The next most common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time and let air escape through these gaps. Replacing these with high-quality weatherstripping can help stop draughts. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures and lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and there may come a point where it is more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it is always recommended to seek help from a professional immediately.