10 Things We All We Hate About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don't get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However, if windows with double panes are anchored by internal beading it will be more difficult to remove the old panes and put in new ones. In this case, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the glass panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional comes out and fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the distance between the door and the window is substantial, you may need to consider a security screen that also includes windows. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. As time passes, they may be affected by a variety of issues such as sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It's important to take action immediately if you realize that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll have to open the window so that you can access the frame. With an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.

If you are unable to move the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loose their elasticity. It is essential to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it can also be due to the mechanism of the handle getting worn out. It's relatively simple to fix a loose upvc window repair near me hand. First, you'll need to close your window and do an experiment to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's crucial to take action. Windows that leak water do not only lead to the degrading of the structure of your home but also undermine your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Based on the severity of the problem the caulking used previously might need to be removed before a fresh layer can be applied. It is important to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more serious instances, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open in a breeze it could be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is essentially a simple process but it can be simpler with someone else to help you hold the frame up.

Verify that the uPVC hinges open and close in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or by a poor installation in the factory. This can often be resolved by sending us a photo on our website. We will be more than happy to give you suggestions.

It is also important to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. First, the hinges because of wear and tear, can become misaligned, this can cause a gap to form between the sash and the frame. They can be fixed by giving them a thorough clean, however when they're beyond repair, it might be necessary to get them re-aligned or replaced. The interlock may also become misaligned. This happens on the hinge side and may need to be cleaned. In certain instances, it may be necessary to replace these.

These seals can wear down or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce draughts.

One of the most effective methods to reduce draughts is by using a draught excluder, these are typically made of fabric which are filled with a kind of filler. They can be positioned on top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

Your upvc windows can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a life span and they may reach the point when it's more efficient to replace them than repair them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance immediately.