10 Misconceptions Your Boss Holds About Repairs To Upvc Windows Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

It is important to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. It is important to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However when you have double-pane windows that are anchored by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this instance, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you are going to try to remove the glass panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled under.

It's a good idea to cover the gap with tape after the glass has been removed. This will prevent water and drafts from entering your home until a professional comes out to fix the window. This will also provide an obstacle to stop intruders from getting into your home. If the gap is large, you may think about a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. However, over time they are susceptible to a range of problems including sliding. A sagging window can cause problems with light, draughts or even security. It is crucial to act immediately if you notice your upvc window repair windows are sliding.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll have to open the window so that you can access the frame. With a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to hold them in place.

If you are unable to move the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows are waterproof and safe from drafts.

UPVC handles can also become loose. This is usually due to screws that have become undone over time, but it could be due to the mechanism of the handle getting worn out. It's relatively easy to fix a loose uPVC hand. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's crucial to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also undermine your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer can be put on. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the problem is with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease, it may be hinges at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It is essentially a very simple process but it can be simpler when you have a person to assist in holding the frame in place.

Check that the upvc window repairs hinges open and close in the proper direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should open.

The problem with the hinges on windows could be caused by improperly opening the window a certain manner or because of poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you suggestions.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges can also be misaligned due to wear, causing gaps where the sash and frame meet. This can be easily fixed by giving them a thorough clean, however if they are beyond repair it might be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window, may also be misaligned, and again it is feasible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

The next most common cause of draughts is the window seals, these are prone to wear or damaged over time and allow air to escape through the gaps. Installing high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and lessen the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They can help block out cold air and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and eventually, they will reach an point at which it is more economical to replace them than fix them. If you have any problems with your upvc window it is recommended to speak with a professional as soon as you can.